Old Masters - Gel Polyurethane
Old Masters® Gel Polyurethane is an oil-based gelled clear finish that produces a soft, handrubbed sheen on wood. Its thick formula enables multiple hand-applied coats without drips, brush marks or strong odors.
We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
SURFACE PREPARATION: All surfaces must be clean, dry and free from dirt, wax, grease, glue and other contaminants or adhesion will be affected. Wood surfaces must be sanded smooth and sanding dust removed. Wood that has been stained or finished should dry completely (24 hours) before application of Gel Polyurethane. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION: Stir thoroughly before and during application. Do not apply in direct sunlight or areas of extreme air movement. 1. 2. 3. 4. 5. Material Safety Data Sheets are also available for this product. OLD MASTERS® P.O. Box 286 Orange City, Iowa 51041 1-800-747-3436 712-737-3893 (Fax) Use a soft, lint-free cloth or paper towel and apply a liberal amount to an entire side or section of your project. Remove excess polyurethane quickly with a clean cloth, then buff lightly and briskly with another clean cloth, working in the direction of the grain until the surface is smooth with a slight wet look. Continue to apply and buff until entire project is coated. Gel Polyurethane will dry to touch in 5 to 6 hours. Allow at least 6 hours between coats. Reapply. Two to three coats are recommended; however, additional coats will enhance build and provide greater protection. Sanding between coats is not necessary.
THINNING: Do not thin. Use as packaged.
COVERAGE: Approximately 700 to 750 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.
DRYING TIME: Apply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Gel Polyurethane will dry to touch in 5 to 6 hours. In case of high humidity, overnight drying may be necessary. Under ideal drying condi- tions, allow 6 hours before recoating. Drying time will be affected by temperature, humidity and film thickness. Protect product from freezing prior to and during application.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup