Flame Retardants

WT-102 Flame Retardant Coating is a Class A (Class 1) Non-Hazardous, Non-Toxic, Interior, LatexBased Flame Retardant Intumescent Coating For Application Over Raw Wood And Other Surfaces.

Fire-poof™ is an interior flame retardant for most fibers and raw wood. May be effective over scenic paint, but must be tested for use with specific paint being used.

Roscoflamex for Delicate Fabrics should be used on sheer fabrics, fine synthetic weaves, rayon, or silk. Premixed for easy use straight out of the bottle, Roscoflamex for Delicate Fabrics maintains the gentleness and soft hand of delicate or fragile fabrics and draperies.

Roscoflamex for Natural Fibers should be used on fabrics like cotton, linen, wool, burlap and most other materials made of natural fibers. Premixed for easy use straight out of the bottle, Roscoflamex for Natural Fibers is perfect for treating backdrops, velours, muslin cycloramas, and decorative fabric panels.

Use Roscoflamex WD to flame treat wood and cellulosic materials. Plywood, board stock, sheet goods, hay, acoustical tile and other common materials can all be rendered flame retardant with Roscoflamex WD. After the Roscoflamex WD treatment has dried fully, wood materials can be painted or stained without affecting the flame retardance.

Roscoflamex SF will flame treat many synthetic fabrics, such as polyesters, nylons, acrylics and rayons, as well as most cotton/synthetic blends.

Roscoflamex PC was formulated specifically to flame treat the many paper products commonly used in props and scenery construction. Most paper products without a wax coating, polyurethane, or other similar water resistant properties can be effectively treated.

WT-103 is a Class B (Class 2) interior, intumescent, clear flat water-based coating for application over wood. WT-103 may also be used for application over other decorative materials when tested by applicator.