Satori - SKPT - Primer Sealer

Satori - SKPT - Primer Sealer

Score: 5.00 (votes: 1)
No reviews.
5.00

Satori SKPT is the best way to prepare walls and ceilings before applying Satori Japanese Wall Finishes. Satori SKPT primer/sealer is suitable for use on Gypsum Board, Sheetrock, Drywall, Mortar Board, Cement Board, Brick, Cement Block Wall, Painted Walls, Ceilings and Plaster (other than stucco).

  • $220.00
Qty:  
In stock (1000 items available)
  • Shipping

    This product ships factory direct from California. Shipping charges must be calculated after ordering, we will call you to complete the shipping payment over the phone. Please allow 5-7 business days for the order to process before shipping.

This product ships factory direct from California. Shipping charges must be calculated after ordering, we will call you to complete the shipping payment over the phone. Please allow 5-7 business days for the order to process before shipping.

SKPT is not only a texturized primer which covers light imperfections in surfaces and provides strong bonding with the finish, but a sealer as well which prevents delamination. Satori finishes glide easily over SKPT.

Sold as a 10 bag batch that covers 300 Sq Ft.

Prepare the substrate according to the Substrate Preparation Manual supplied by Shikoku International Corporation. Proper preparation of the substrate is required before application of Satori plaster finish. Failure to do the required preparation may result in delamination and other problems with the final finish. The Substrate Preparation Manual provided by Shikoku International Corporation, is a general resource manual available for download through the Satori website www.satoriwalls.com and is intended for persons familiar and having technical knowledge of the preparation of various wall substrates prior to the application of wall plaster and is not intended to instruct or be relied upon as a determination for the suitability of any particular project.

Satori SKPT primer/sealer is suitable for use (with proper preparation) on the following substrates: 

  • Gypsum Board, Sheetrock, Drywall, Mortar Board, Cement Board 
  • Brick or Cement Block Wall 
  • Painted Walls and Ceilings 
  • Plaster (other than stucco)

Satori SKPT is for interior use only. Do not apply on any exterior surfaces.

NOTE: NIOSH approved dust masks (N95) and chemical resistant gloves required during mixing

  • Do not use a drum mixer machine. Use electric hand mixer. 
  • Size batch for entire surface area where consistent texture or consistent color is required. 
  • Combine and re-mix multiple batches as necessary. 
  • Apply SKPT mix promptly within a maximum of 4 hours after mixing. Cover when not in use. 
  • Satori® SKPT is for trowel application only


Satori® SKPT Mixing Instructions and Coverage Rates 

  • Standard quantity of water: 1 and 3/4 quarts (1.9L) per one bag of Satori SKPT. 
  • Satori SKPT primer/sealer can be applied using a one or two coat method as described below. The one coat method can be used over smooth surfaces and the two coat method can be used to achieve up to 1.5mm thickness to cover uneven or lightly textured surfaces. The objective is to obtain uniform coverage without any bare spots and to achieve a minimum thickness of 1mm and a maximum thickness of 1.5mm. The following are the expected coverage rates at different thickness levels and you may use the standard credit card thickness of .03 inch as a handy visual aide: 
  • Thickness of 1mm =.039 or 1/25 inch or slightly less than 1.5 credit cards thick, yields a coverage rate of 35 square feet on average, per bag of SKPT primer/sealer. 
  • Thickness of 1.5mm =.059 or 1/17 inch or approximately 2 credit cards thick, yields a coverage rate of 21-22 square feet on average, per bag of SKPT primer/sealer.

PROCEDURE

  1. Pour 80% (1.5L) of required quantity of water into a plastic container. 
  2. Properly place NIOSH approved (N95) dust mask and chemical resistant gloves over person doing mixing and any other persons in close proximity. 
  3. Add one bag of Satori SKPT primer/sealer and mix it thoroughly using electric hand mixer. 
  4. Stop mixing and let the mixture stand for 30 minutes. 
  5. Add up to the remaining 20% of water until mix reaches desired application consistency.

NOTE: 

  • A one or two-coat process may be used to achieve the desired total coating thickness. 
  • For uneven or lightly textured surfaces, a two-coat process is recommended up to 1.5mm thick. 
  • Satori SKPT primer/sealer is suitable for trowel application. Do not use spray machine. 
  • Interrupt application only at junctions of coating planes, at openings, and at edges. 
  • Recommended total coating thickness is 1mm – 1.5mm. 

PROCEDURE

  1. Use rigid rectangular or pointed (use where rectangular trowel doesn’t fit) stainless steel trowels in the size and shape appropriate for the area of the wall being worked on, i.e. corners and edges may require very small specialty trowels. 
  2. Decide whether you will use a one or two coat method. If using one coat proceed to step 5 after applying product uniformly over all areas covering all bare areas up to the recommended thickness of between 1mm and 1.5mm (see section above about coverage rates). 
  3. Apply first coat. First coat shall be flat to true surface and thinner than the second coat or about the thickness of the aggregate. 
  4. When the first coat surface water begins to withdraw or go matte, apply the second coat uniformly up to the recommended thickness. Do not let the first coat dry before applying the second coat. Apply the second coat quickly after the first coat begins to go matte. 
  5. Dry completely for a minimum of 12 hours before applying finishing plaster.

Related products