Golden Paintworks - Venetian Plaster
This acrylic plaster is applied by trowel in thin layers, then burnished by applying pressure to the trowel’s edge while drying. It contains enough Titanium Dioxide that it can be used as a “white” or very light tint, however, it can easily be tinted to mid-tone colors.
We Color Match popular paint swatches! Note: A color sample of the plaster is made on card stock and left to air dry. The dried color sample, without burnishing or waxing, is what we match to the selected color swatch. The final finish will have deeper tones and darker shades of your color. All of our custom colors are tinted by eye and as such some minor color variance is to be expected. All custom mixes add one to four business days to our processing time.
Coverage: Approx. 100-300 sq.ft./gal.
Dry Time: Touch: 1 hour | Recoat: 4 hours
Clean Up: Warm soapy water.
We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
Golden Paintworks Venetian Plaster Texture is a timeless, spray, roller or trowel applied coating for rich, multi-dimensional effects and dramatic depth of color. Burnish for a high-polish, marble-like appearance.
- The look and feel of polished marble
- Rich opaque color with multi-dimensional effects
- Tints and mixes easily.
- Easy to apply interior finish
- Many effects possible, based on application technique
- Water clean up
- VOC Compliant
Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a smooth, sound surface (See warning below). Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. If existing paint is in good condition, priming is not needed. If a surface is new, priming and painting with an eggshell or satin finish wall paint will provide the best, uniform surface for applying Venetian Plaster.
WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as properly fitted respirator (NIOSH approved) andproper containment and cleanup. For more information, call the National Lead Information Center at –LEAD (in US) or contact your local health authority.
Drywall: Fill cracks and holes with patching paste/spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.
Masonry, Concrete, Cement, Block: All new surfaces must be cured according to the supplier’s recommendations—usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with a quality concrete and masonry primer.
- Apply at temperatures between 50° F & 90° F.
- Ready to use.
- Apply only to clean, dry, painted or primed surfaces.
- Apply using very thin, sheer applications, particularly for the first coat, and use multiple coats. Applications thicker than 10 mil will likely crack.
- May be tinted with waterborne or Universal colorants (UTC), up to 10% by volume.
- Allow a minimum of 1 to 4 hours drying time between coats.
- Test your technique on a practice board before applying to walls.
- For indoor use.
- Not for use on floors.
Tools Needed: Flat edged, flexible trowel/spatula with rounded corners
Coverage: Highly dependent on application technique and number of layers. Approx. 100-300 sq.ft./gal..
Dry Time: @ 50% RH, 77° F: Touch 1 hour. Recoat 4 hours. Cold weather & high humidity will slow down dry time.
WARNING! Causes eye irritation. Wash thoroughly after handling. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Inhalation of concentrated vapors (contains aqueous ammonia) can cause headache, nausea and irritation of the nose, throat and lungs. Provide adequate ventilation.
Clean Up: Clean your skin and equipment immediately after use with soap and warm water. Consult with local authorities for methods of disposal.
Storage: Store in a cool/dry location @ temperatures between 40° F & 90° F. Do not allow material to freeze or be exposed to temperatures exceeding 120° F for extended periods.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup