BREAK-THROUGH - Custom Color
Break-Through! offers outstanding early block resistance and quick dry, resulting in fast turnaround and increased productivity. This product provides hardness similar to or better than standard alkyds with a low-VOC formula.
We mix Custom Colors! Note: A color sample of paint is made on card stock and left to air dry. The dried color sample is what we match to the selected color swatch. All of our custom colors are tinted by eye and as such some minor color variance is to be expected. All custom mixes add one to four business days to our processing time.
We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
Application: Stir thoroughly before using and occasionally when in use. Prime all necessary surfaces with an appropriate PPG primer prior to application of the product. When using more than one container of the same color, intermix to ensure color uniformity. Do not mix with solvent-type paints or with paint solvents. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Material Safety Data Sheet (MSDS) information prior to use. MSDS are available through our website or by calling 1-800-441-9695.
Application Equipment: Apply with a high quality synthetic brush, roller, paint pad, or by spray equipment. Where necessary, apply a second coat. Airless Spray: Pressure 2000 psi, tip 0.009” - 0.013”. Best results are achieved using a fine finish tip. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendation. Highpressure injection of coatings into the skin by airless equipment may cause serious injury.
- Brush: High quality polyester/nylon brush
- Roller: 3/16” - 3/8” nap roller cover.
Thinning: No thinning required for airless or air-assisted airless application. Reduce 5-10% with clean water for conventional spray, HVLP and brush applications.
COVERAGE: Approximately 400 sq. ft./gal. (37 sq. m/3.78L) depending on surface texture and porosity.
Dry Microns: 36 microns Coverage figures do not include loss due to surface irregularities and porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
- To Touch: 15 to 20 minutes
- To Handle: 1 hour
- To Recoat: After 2 hours
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup