Evercoat - Feather Fill G2 - Gallon
A high-build, high-solids Premium Polyester Primer Surfacer that is compliant with California and National Rule VOC regulations. It has been specifically developed to work with 1K and 2K etch primers, while offering exceptional flow and leveling. Other features include smooth spraying, easy sanding, fast dry-to-sand time and a shrink-resistant formula.
Items that qualify for free shipping are sent FedEx ground. We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
Approved Substrates: Fiberglass, SMC, Rigid Plastics, Body Filler or Putty, Epoxy Primer, and Self-Etch Primer (extends dry-to-sand time).
Appearance: Gray, Buff, or Black liquid
VOC: Refer to Section 9 of the Safety Data Sheet
Dry-Film-Thickness (DFT): 2.0 – 4.0 mils per coat
Solids by Volume: 57-62%
Viscosity (Ready to Spray): 30-35 seconds in Zahn #3
Max Recommended Thickness (sanded): 1/4 inch (6mm)
Coverage at 1 mil 100% Transfer: 1200 sq. ft. per U.S. gallon
Prep for Untreated Steel, Galvanized Steel and Bare Aluminum: All bare metals must be treated with a high quality epoxy primer prior to the application of Feather Fill. Follow paint company’s recommendations for surface prep and recoat of epoxy primer.
Prep for Pre-Painted Surfaces: Sand repair area and featheredge using 180 grit, 220 grit and finish with 320 grit sandpaper on a random orbital sander. Final clean with a quality wax and grease remover to remove sanding residue prior to applying Feather Fill.
Prep for Body Filler or Putty: Finish sanding body filler or putty with 180-220 grit sandpaper. Featheredge with 320 grit sandpaper. Blow off the surface with an air blow gun.
Mixing: Shake and stir thoroughly before mixing. Add one tube (.75 fl. oz.) liquid hardener to one quart of Feather Fill or 2% by weight and mix thoroughly. Pot Life is 35 minutes @ 75°F (24°C). Do not leave product in the spray gun for longer than 45 minutes.
Application: Use a primer gun with a 1.7 to 2.2 fluid nozzle/air cap (Spray at paint gun manufacturer’s recommended air pressure). Apply 2-3 medium wet coats allowing 5-10 minutes flash time between coats.
Finish: Ready to sand in 75-90 minutes depending on film build. Applying over self-etch primer could add 4-6 hours to the dry time. Once dry sand Feather Fill with 400-600 grit sandpaper prior to next step.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup