Buy Evercoat's Rage Gold lightweight filler for less

Evercoat - Rage Gold Premium Lightweight Filler - Gallon

Exceptionally easy sanding body filler. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum. Blue cream hardener included.

Shipping

We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.

Learn more

Evercoat Rage Gold Premium Lightweight Filler TDS.pdf 350.1 kB
Evercoat Rage Gold Premium Lightweight Filler MSDS.pdf 346.6 kB

Evercoat’s easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite™, a unique ingredient which reduces heat and friction created by aggressive sanding. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks® System. Blue cream hardener included.

Approved Substrates: Steel, Aluminum, Fiberglass, Galvanized Steel and SMC.

Appearance: Smooth golden paste

VOC: Refer to Section 9 of the Safety Data Sheet

Relative Density: Refer to Section 9 of the Safety Data Sheet

Sand Time: 20 min.

Max Recommended Thickness (sanded): 1/4 inch (6mm)

PREPARATION: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge.

MIXING: Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 3-5 minutes @ 72°F (22°C)

APPLICATION: Apply in layers with even firm pressure. Do not apply all at once.

FINISH: Sand body filler with 80 grit sandpaper. Finish sand body filler with 180 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches. For best results, apply a premium Evercoat polyester putty to provide a smoother finish and reduce the amount of primer surfacer needed for a quality finish.

We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.

All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.