Katilac - Summit - White Conversion Varnish

Score: 5.00 (votes: 1)
No reviews.

The D9 Series SUMMIT is a line of white, solvent borne, two component, low VOC, alkyd/amino resin based conversion varnishes. They are high hiding topcoats that feature outstanding chemical resistance and exceptional build. This product only ships via FedEx Ground.

  • $25.00
Model #:  
  • Payment methods


  • Shipping

    We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page. 


  • Interior trim and millwork
  • Office furniture 
  • Household furniture 
  • Cabinets 
  • Kitchen and bath components 
  • High demand furniture 


  • Low VOC 
  • Excellent hiding 
  • High build 
  • Outstanding mar and scratch resistance 
  • Ultra-low formaldehyde 
  • Outstanding chemical and moisture resistance 
  • Excellent flow and levelling 
  • Exceeds NAAWS System #5 Standards

COATING PREPARATION - Ensure product is stirred well and brought to room temperature before use. Add 10% 1CAT Acid Catalyst by volume slowly under agitation (prior to reduction). Pot-life is 10-12 hrs at room temp. Product may be sprayed by conventional, airless and air-assisted airless spray. D9 SUMMIT requires 10% reduction with T5247 High Flow Reducer to spray. 

SURFACE PREPARATION - Wood surface should be clean, dry and free from any oil or grease. Moisture content of the wood should be between 7-9%. Sand surface smooth with 150- 180 grit sand paper.

APPLICATION - This product is designed to be applied in ambient conditions of 12-32°C (~55-90°F) and below 50% relative humidity. 

For easier primer application, seal routed MDF areas with a KCI post-catalyzed sealer or topcoat. Allow to dry 30-60 minutes at room temperature and sand coated areas with 240-320 grit sand paper. Primer the entire substrate with D28 DURAPRIME and allow to dry 30-60 minutes. Sand entire surface with 240-320 grit sand paper. 

Apply D9 SUMMIT in a full uniform coat at a rate of 4 to 5 mils wet. Dry for 1-2 hours at room temperature and sand the entire surface with 240-320 grit sand paper. Apply a second thin coat of SUMMIT™ at 3 to 4 wet mils. Proper sanding is critical to produce a smooth finish and promote adhesion between the primer coat and the topcoat. 

Total film thickness of the finished system (primer and topcoat) should not exceed 5 dry mils.

We accept the following payment methods:

We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation. 

All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.

  • FedEx Priority Overnight
  • FedEx Standard Overnight
  • FedEx 2Day A.M
  • FedEx 2Day
  • FedEx Express Saver
  • FedEx Ground
  • Local In Store Pickup 

Related products