A premium quality, 100% acrylic, non-yellowing, water base varnish formulated to have the optimum level of clarity with the least amount of sheen.
We deliver nationwide, see our shipping rates by adding items to the shopping cart.
Application - Dead Flat Varnish can be applied by brush, roller or spray equipment. Do not apply when air and surface temperature are below 50ºF (10ºC) or high humidity conditions exist. Optimal application conditions are 60ºF-80ºF (16ºC-27ºC) and 30%-60% relative humidity. For most applications thinning is unnecessary. Stir thoroughly before use. Do Not Shake.Brushing - Use a high-quality synthetic bristle brush.
Rolling - Use a high-quality, soft short nap roller.
Spraying - Use a HVLP sprayer powered with an air compressor. If thinning is necessary, add up to 10% (3 fl. oz./85ml) of water per quart/946ml of Exterior Dead Flat Varnish. When spraying, use a NIOSH approved respirator.Dry Times - Dry-to-touch is in approximately 30 minutes, re-coat is in approximately two hours, and full cure is in approximately 12 hours. Thicker film, temperature below 60°F (16°C) and relative humidity above 50% may result in slower dry times.Coverage - Approximately 350 to 450 sq. ft./Gal., 31.5-40.5m²/3.78 L.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
© 1993 - 2019 Star Scenic - Paints & Coatings. All rights reserved.
Powered by X-Cart