Buy Rosco Flamex WD Raw Wood for less

Rosco - Flamex WD - Raw Wood

Use Roscoflamex WD to flame treat wood and cellulosic materials. Plywood, board stock, sheet goods, hay, acoustical tile and other common materials can all be rendered flame retardant with Roscoflamex WD. After the Roscoflamex WD treatment has dried fully, wood materials can be painted or stained without affecting the flame retardance.

Shipping

We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.

Learn more
Payment methods

Learn more

Rosco Flamex WD TDS.pdf 86.5 kB
Rosco Flamex WD MSDS.pdf 316.5 kB
Rosco Flamex WD Certificate.pdf 400.9 kB

Roscoflamex for Raw Wood is a proprietary, non-durable flame retardant.

APPEARANCE: Pale Orange liquid that dries clear.

Roscoflamex WD has been premixed and does not require any further dilution. The method of application and the amount of Roscoflamex WD required for sufficient treatment varies with the materials in use.

Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.

Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption. Saturate the material, allow to absorb and then reapply a second treatment.

Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the material. Use a Hudson-type sprayer with a medium nozzle setting. Saturate the material, allow to absorb and then reapply a second treatment.

The absorption rate of the wood or cellulosic materials being used may dramatically affect proper flame retardance. Make sure you test for effective flame retardance.

MIX RATIO: Roscoflamex Raw Wood is designed to be used straight out of the bottle. Do not dilute.

HAZARD: May cause skin and eye irritation on some people. Use in a well ventilated area.

COVERAGE: Estimated 150-200 square feet per gallon.

DRYING: Allow to dry naturally or using forced hot air.

COMPOSITION: Water soluble inorganic salts. Safe for professional use.

CERTIFICATION: ASTM E84 Class B; NYC FD Certificate of Approval; CA State Fire Marshall

We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.

All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.