SCOFIELD Formula One Guard-W is a polymeric water and stain resistant burnishing finish that is designed to guard and protect smooth ground and polished concrete surfaces. 

Its organo-silicate hybrid composition combines the densifying and abrasion resistant properties of lithium silicate, with the stain blocking properties found only in self-crosslinking organic systems. 

Applied after application of a quality concrete densifier, SCOFIELD® Formula One Guard-W should be polished to the desired gloss level with high-speed floor burnishing equipment. Properly installed, a thin yet durable film with good moisture transmission properties remains. This film will not crack, peel, or delaminate under normal conditions. 

USES

Use as a final concrete polish to guard and protect interior: 

• Smooth ground concrete floors 
• Ground flat exposed aggregate 
• Ground smooth embedded terrazzo 
• Ground smooth cementitious overlays 
• Countertops 

CHARACTERISTICS / ADVANTAGES

• Adds water and stain resistance. 
• Low odor, non-yellowing water based formulation. 
• Breathable thin film forming surface treatment. 
• Bonds directly to cement and aggregate silicates. 
• Effectively locks in concrete dyes. 
• Shortens concrete polishing times. 
• Does not gum burnishing equipment. 
• UV light stable. 
• Cures to a non-toxic surface. 
• Apply by spray and mop. 

APPROVALS / STANDARDS 

SCOFIELD Formula One Guard-W can be used as part of a low VOC concrete polishing system to earn LEED credits for Indoor Environmental Quality, EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings. 

SCOFIELD Formula One Guard-W can be used to make floors that exceed the Underwriters Laboratories Safety Standard UL 410, "Slip Resistance of Floor Surface Materials."