Katilac - Diamond - Clear Conversion Varnish
The KD Series DIAMOND is a line of solvent borne, two component, alkyd/amino resin based conversion varnishes. They are clear, yellowing resistant topcoats that feature fast dry and easy sanding along with outstanding chemical, moisture & abrasion resistance. This product can only be shipped via FedEx Ground.
We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
The DIAMOND Series topcoats can be used in a self-sealing system or in conjunction with KCI sanding sealers on high demand furniture and cabinet applications. KD Series DIAMOND Conversion Varnishes are extended pot-life products, having a pot-life up to 5 days pot-life after catalyzed.
- Household furniture
- Interior trim and millwork
- Office furniture
- Kitchen and bath components
- High demand furniture
KEY PERFORMANCE FEATURES
- Extended pot-life
- Excellent hardness
- Fast dry
- Outstanding mar and scratch resistance
- Ultra-low formaldehyde
- Outstanding chemical and moisture resistance
- Excellent flow and levelling
- Exceeds NAAWS System #5: Conversion Varnish Standards
COATING PREPARATION - Ensure product is stirred well and brought to room temperature before use. Product may be sprayed by conventional, airless and air-assisted airless spray. Add 5% 1CAT Acid Catalyst to unreduced product slowly under agitation. Thin with lacquer thinner as required, agitate. Pot life up to 5 days at room temperature in closed pails.
SURFACE PREPARATION - Wood surface should be clean, dry and free from any oil or grease. Moisture content of the wood should be 7-9%. Stains, colour coats, glazes etc. should be applied according to manufacturer’s directions should be dried prior to application of sealers/topcoats. Multi-step colourant systems should be avoided unless they are thoroughly tested for adhesion and compatibility. All colour systems should be examined for colour fastness / fade resistance prior to use. For best results use Katilac stains, toners or colourant systems. Contact a Katilac Tech Service Representative for colour system recommendations.
APPLICATION - This product is designed to be applied in ambient conditions of 12-32°C (~55-90°F) and below 50% relative humidity. KD Series DIAMOND™ Conversion Varnishes can be used selfsealing or in conjunction with VS4 QUICKSEAL™ PostCatalyzed Vinyl Modified Sanding Sealer. Apply product in full uniform coats ideally applied at a rate of 3 to 4 mils wet. Total film thickness of the finished system (sealer and topcoat) should not exceed 4 dry mils. Coating should be thoroughly dried and sanded smooth between coats. Sand with 240-320 grit professional finishing stearated, silicon carbide sandpaper. It is recommended that the finished item be conditioned for 12 hours at room temperature prior to stacking and packing.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup