Apply the Rust Activator with a brush, sea sponge or spray apply with a plastic pump sprayer. After 5 minutes, reapply Rust Activator. As the activated surface dries (approx. 30-40 min.) a real rust finish will appear. Cold temperature and/or humid conditions will prolong the oxidation process and dry time. Allow 24 hours prior to applying Permacoat Xtreme.

Protective Clear Coating –The rusted surface should be protected with Metal Effects Permacoat Xtreme™ DO NOT USE OTHER SEALERS OR VARNISHES. Permacoat Xtreme can be applied by brush, roller or spray. Surface must be completely dry prior to top coating. First coat: Add equal parts of Permacoat Xtreme with water and stir well before applying. Second coat: Apply Permacoat Xtreme at full strength. Let surface dry for 1 hour before handling. Full cure time is 7 to 10 days.

Clean Up – Clean brushes, rollers, tool, and equipment with soap and warm water immediately after use. Do not reuse containers and properly dispose of empty containers.