Katilac - EK8 - Clear Vinyl Sanding Sealer
EK8 KATILAC Vinyl Sealer is a solvent borne, one component, alkyd/amino/vinyl resin based clear sanding sealer. It is waterwhite, yellowing resistant, easy to sand and exhibits excellent hold-out and adhesion properties.
GallonFive Gallon PailSize: not selected
We deliver nationwide, see expedited transit times and our shipping rates by entering your shipping info on the checkout page.
EK8 has been specifically designed to be used in combination with KCI’s EK Series KATILAC Pre-Catalyzed Lacquers or KU Series KATILAC ULTRA PreCatalyzed Clear Conversion Coatings as part of a high quality interior wood finishing system. EK8 is designed to be used as manufactured with any of KCI pre-catalyzed topcoats. This product can be catalyzed 5% by volume when used in conjunction with KCI’s post-catalyzed topcoats.
- Interior trim and millwork
- Office furniture
- Household furniture
- Kitchen and bath components
KEY PERFORMANCE FEATURES
- Excellent clarity
- Fast dry
- Easy sanding
- Gun ready for all spraying systems
- Ultra-low formaldehyde
- Chemical and moisture resistance
- Excellent flow and leveling
- Excellent filling properties
- Excellent wood adhesion
COATING PREPARATION - Ensure product is stirred well and brought to room temperature before use. Product may be sprayed by conventional, airless and air-assisted airless spray and is gun ready. If reduction is required, use T4409 at 5% by volume.
SURFACE PREPARATION - Wood surface should be clean, dry and free from any oil or grease. Moisture content of the wood should be 7-9%. Stains, colour coats, glazes etc. should be applied according to manufacturer’s directions and should be dried prior to application of sealers/topcoats. Multi-step colourant systems should be avoided unless they are thoroughly tested for adhesion and compatibility. All colour systems should be examined for colour fastness / fade resistance prior to use. For best results use Katilac stains, toners or colourant systems. Contact a Katilac Tech Service Representative for colour system recommendations.
APPLICATION - This product is designed to be applied in ambient conditions of 12-32°C (~55-90°F) and below 50% relative humidity. Apply product in full uniform coats ideally applied at a rate of 3 to 4 mils wet. Total film thickness of the finished system should not exceed 4 dry mils.
Coating should be thoroughly dried and sanded smooth before application of the topcoat. Sand with 240-320 grit professional finishing stearated, silicon carbide sandpaper. It is recommended that the finished item be conditioned for 24 hours at room temperature prior to stacking and packing.
We make it our mission to ship your order in a timely fashion. Due to the nature of our business and the wide variety of our product offerings we sometimes encounter stock issues. Should there be any issues getting your order shipped we will contact you to update you on the situation.
All in stock items ship within 24 business hours. If you need your order shipped sooner than that please contact us directly before placing your order.
- FedEx Priority Overnight
- FedEx Standard Overnight
- FedEx 2Day A.M
- FedEx 2Day
- FedEx Express Saver
- FedEx Ground
- Local In Store Pickup